馬丁耐熱試驗儀 微機  型號：BMD：橡膠塑料熱變形，馬丁耐熱  用途：橡膠塑料熱變形

馬丁耐熱試驗儀 微機制造標準：
GB1699-2003 硬質橡膠 馬丁耐熱溫度的測定
GB1035-70 塑料耐熱性（馬?。┰囼灧椒?/p>

  GB1699/GB1035馬丁耐熱試驗儀的詳細資料：
一 產品名稱：馬丁耐熱試驗儀-微機控制
二 馬丁耐熱試驗儀 微機產品型號：XR-200
 三 馬丁耐熱試驗儀 微機主要適用范圍及功能：
　   制造標準：GB1699-2003 硬質橡膠 馬丁耐熱溫度的測定
                            GB1035-70   塑料耐熱性（馬?。┰囼灧椒?br />可對塑料、尼龍、橡膠、電纜料等高分子材料進行耐熱溫度的測試。
            馬丁耐熱測試儀本機用智能控制器控制溫度，控溫效果理想；采用光柵式高精度百分表，使測量值更穩定。
 四 馬丁耐熱試驗儀 微機主要技術參數：
1. 加熱箱內各點溫度差：≤2℃
2. 等速升溫速率為：50±3℃/h和10±2℃/12min
3. 溫度計精度：1℃
4. 試樣尺寸：（120±1mm）X（15±0.2mm）X（10±0.2）mm的條形試樣，厚度大于 10mm者可雙面加工為10mm
5. 試驗負荷：50±0.2kgf/cm2
6. 試驗起始溫度：30±10℃
7. 試樣彎曲有效長度：56±1mm
五 馬丁耐熱試驗儀 微機配置
1. 主機一臺
2. 控制系統一套
3. 采集系統一套
4. 變形測量裝置三套
5. 溫度傳感器一套
6. 測頭三套
7. 砝碼三套
8．計算機一套（聯想品牌）
9．彩色噴墨打印機一臺（惠普）
10.內箱尺寸:350X400X400mm
Martin heat resistance test instrument for microcomputer type: BMD: rubber plastic thermal deformation, Martin heat usage:

rubber plastic thermal deformation
Martin heat resistance test instrument for microcomputer manufacturing standards:
GB1699-2003 ebonite determination of Martin heat resistance temperature
GB1035-70 heat-resistant plastic （ Martin ） test method
GB1699/GB1035 Martin heat resistance tester details:
Product Name: Martin heat resistance test instrument with microcomputer control
Two Martin heat resistance test instrument for microcomputer product type: XR-200
Three Martin heat resistance test instrument of main computer application and function:
Manufacturing standards: GB1699-2003 ebonite determination of Martin heat resistance temperature
GB1035-70 heat-resistant plastic （ Martin ） test method
For the plastic, nylon, rubber, cable and other polymer materials for heat resistance temperature measurement.
Martin heat resistance tester the machine inligent controller to control the temperature, the temperature effect is ideal;

the grating type high precision dial indicator, so that the measured value stability.
Four Martin heat resistance test instrument for microcomputer main technical parameters:
The 1 heating at each point in the box:≤ 2 ℃temperature difference
2 constant heating rate : 50± 3℃ /h and 10± 2℃ /12min
Thermometer 3 precision: 1℃
4 sample size: （ 120 ± 1mm ） X （ 15 ± 0.2mm ） X （ 10 ±0.2） mm bar specimen, thickness greater than 10mm double-sided

processing for 10mm
5 test load: 50 ± 0.2kgf/cm2
In 6 experiments: starting temperature of 30± 10 ℃
7 bending length: 56 ± 1mm
Five Martin heat resistance tester computer configuration
The 1 hosts
2 control system
The 3 collection system
4 deformation measuring device three sets
A 5 temperature sensor
6 probe three sets
7 three set of weights
A set of 8 computer （ brand ）
9 color inkjet printer （ HP ）
Inner box size: 10 350X400X400mm